Setup Menus in Admin Panel

  • No products in the cart.

Profile Photo
  • Webinar No: WBNR 1180
  • PDH Units: 2

Webinar No: WBNR 1180
PDH Units: 2
$119.00

Profile Photo
  • Webinar No: WBNR 1180
  • PDH Units: 2

Webinar No: WBNR 1180
PDH Units: 2
$119.00

Intended Audience: Civil & Geotechnical Engineers
Credits: 2 PDH Units
When: Tuesday 7/11, 2 - 4 pm ET

This presentation will address four topics: The first one will briefly address landslip risk assessment applied to either cities or highways or railways. The second topic is debris flow. We will discuss a few examples and the major one that took place in Vargas Mountain, Venezuela. The third topic will be site investigation. We will discuss how to plan a site investigation program with geophysics, boreholes, laboratory tests and, in some cases, in situ tests. We will discuss examples of dry slopes which failed under severe rainstorms. Finally, we will discuss slope stability analysis through limit equilibrium Methods (LEM), how to select a factor of safety, the use of appropriate software, and when LEM can or cannot be used. The Slope course is based on the Handbook of slope stabilization, a copy of which will be made available to the participants.

Date: Tuesday July 11.  2 - 4 pm ET Credits: 2 PDH Units

Learning Objectives

At the successful conclusion of this course, you’ll be able to identify and discuss:
  • How to plan risk analysis;
  • How to plan a site investigation program;
  • How to carry out stability analysis.

Special Webinar Instructions

After payment, please visit this webinar page, click “Start Course” and fill out the Webinar Registration Form.  You’ll receive email notification and details on how to join the webinar.  You will then be able to access the webinar slides, test your system and receive webinar reminders.  After completing the webinar requirements, your certificate of completion will be saved and available for download in your profile. We value your feedback! Please rate this webinar after completion.

Group Discounts Available

Join us this Thursday afternoon for a special Engineering Structure webinar:
Dos & Don’ts In Steel And Connection Design.
Starts 2pm ET
https://www.pdhsource.com/course/live-webinar-dos-donts-in-steel-and-connection-design/

We have put together our favourite #Engineering themed #podcasts for you. You're welcome 😉 #fridayfeeling https://www.borntoengineer.com/resources/top-engineering-podcasts-stem-podcast-list-top

ACCEPTANCE GUARANTEE


ncees

PDH Source engineering courses & live webinars meet NCEES Guidelines for Professional Engineer licenses renewal in all 50 states.

PDH Source will refund your money if the PDH credits you earn are rejected by your state board for any reason.

top
Copyright 2019 · All Rights Reserved PDH Source, LLC 513 E- Main Street # 981 Charlottesville, VA 22902 USA