Setup Menus in Admin Panel

  • No products in the cart.

Profile Photo
  • Course No E – 1237
  • PDH Units 3.00

Course No E - 1237
PDH Units 3.00
$75.00

Profile Photo
  • Course No E – 1237
  • PDH Units 3.00

Course No E - 1237
PDH Units 3.00
$75.00

Intended Audience: civil and mechanical engineers and other design and construction professionals

PDH UNITS: 3

Before raw water is desalinated, the undesirable materials will be removed or reduced to acceptable levels. Such materials to be removed include solids, immiscible liquids, and sparingly soluble salts. Accumulations of these materials on desalination process surfaces greatly reduce efficiencies. Without adequate pretreatment, desalination facilities are destined for reduced lifetimes, shortened periods of operation, and high maintenance. Course Outline 1. SITE SELECTION 2. WATER SOURCE SELECTION 3. GENERAL PROCESS SELECTION 4. PRETREATMENT CONSIDERATIONS This is an introduction to the materials and methods recommended for pretreatment of source water for water desalination processes.

Learning Objectives

At the successful conclusion of this course, you’ll be able to identify and discuss:
  • Learn about physical and chemical treatment processes used to remove solid materials;
  • Learn how most common organic materials, such as tannins and humic acids, can be removed from water by chemical treatment;
  • Learn the importance of pH adjustment for optimal performance of desalination systems;
  • Learn how to inhibit formation of scale to maintain the efficiency of product water recovery during plant operation;
  • Learn the two ways degasification and deaeration of feed water can be accomplished;
  • Learn about single-, dual- and mixed-media filtration techniques.
  • Learn how to employ filtration with granular media in pretreatment systems.

Join us this Thursday afternoon for a special Engineering Structure webinar:
Dos & Don’ts In Steel And Connection Design.
Starts 2pm ET
https://www.pdhsource.com/course/live-webinar-dos-donts-in-steel-and-connection-design/

We have put together our favourite #Engineering themed #podcasts for you. You're welcome 😉 #fridayfeeling https://www.borntoengineer.com/resources/top-engineering-podcasts-stem-podcast-list-top

ACCEPTANCE GUARANTEE


ncees

PDH Source engineering courses & live webinars meet NCEES Guidelines for Professional Engineer licenses renewal in all 50 states.

PDH Source will refund your money if the PDH credits you earn are rejected by your state board for any reason.

top
Copyright 2019 · All Rights Reserved PDH Source, LLC 513 E- Main Street # 981 Charlottesville, VA 22902 USA