Setup Menus in Admin Panel

  • No products in the cart.

1
Profile Photo
  • Webinar No: WBNR-1146
  • PDH Units: 2

Webinar No: WBNR-1146
PDH Units: 2
$99.00

1
Profile Photo
  • Webinar No: WBNR-1146
  • PDH Units: 2

Webinar No: WBNR-1146
PDH Units: 2
$99.00

Intended Audience: Civil & Wastewater Engineers
Credits: 2 PDH Units
When: Wednesday 8/19. 2 - 4 pm EST

The stabilization and solidification (S/S) technology is a highly-effective hazardous waste treatment, disposal and management solution used today. But with all of the different mechanisms, technologies and reagents, implementation options and system design considerations, navigating S/S waste treatment can be challenging. Dive into this hazardous waste stabilization and solidification webinar carefully prepared by industry specialist Dr. Karim, P.E., M.ASCE to get everything you need to know about waste treatment with S/S technology. This PDH engineering webinar kicks off with an introduction to the definitions, regulations and applications involved in hazardous was stabilization and solidification. After this comprehensive overview, we’ll then move on to the mechanisms (eg. microencapsulation, absorption, adsorption, precipitation, detoxification) involved in S/S hazardous waste treatment. We’ll then cover popular reagent additives to S/S technology for waste treatment (e.g. cement, pozzolans, lime, soluble silicates, organically modified clay, modified lime, thermosetting organic polymers, thermoplastic materials and vitrification Next, the webinar then describes the overall ability of a stabilized material to leach contaminants (i.e. leachability) and the range of variables that affect contaminant concentrations in leachate. After this discussion, the course material walks through a wide range of specific extraction and leaching testing methodologies including the EPA’s Toxicity Characteristics Leaching Procedure (TCLP) as well as the Paint Filter Test, Liquid Release Test, Extraction Procedure Toxicity Test, American Nuclear Society Leach Test, Equilibrium Leach Test, Dynamic Leach Test, Sequential Chemical Extraction, Multiple Extraction Procedure, the different chemical tests, and the Physical and Engineering Property Test. Following these extraction and leaching testing descriptions, the different field implementation options are then delineated. In particular, this section describes In-Drum Mixing Alternatives, In-Situ Mixing Alternatives as well as Plant Mixing Alternatives. This online PDH webinar wraps up by outlining the important terms, components, waste characterizations, site considerations, and flow of stabilization processes involved in waste treatment systems design.

Date:  Wednesday. August 19 Starts: 2 - 4 pm EST Credits: 2 PDH Units

Learning Objectives:

At the successful conclusion of this webinar, you will learn the following knowledge and skills:
  • Understand the basics of hazardous waste treatment stabilization and solidification.
  • Learn different mechanisms of hazardous waste stabilization and solidification.
  • Be familiar with different technologies and reagents used for waste stabilization and solidification.
  • Gain the knowledge of different EPA test methods used for waste treatment stabilization and solidification technology.

Special Webinar Instructions

After payment, please visit this webinar page, click "Start Course" and fill out the Webinar Registration Form.  You'll receive email notification and details on how to join the webinar.  You will then be able to access the webinar slides, test your system and receive webinar reminders.  After completing the webinar requirements, your certificate of completion will be saved and available for download in your profile. We value your feedback! Please rate this webinar after completion.

Group Discounts Available

Course Reviews

1

1
1 ratings
  • 5 stars0
  • 4 stars0
  • 3 stars0
  • 2 stars0
  • 1 stars1
  1. carol donnelly08/21/2020 at 2:06 pm
    Hazardous Waste Treatment with Next-Level S/S Technology
    1

    Audio was poor quality and sounded muffled throughout.
    Not very interactive – I did not hear nor read any comments from other attendees.
    Would not recommend.

Join us this Thursday afternoon for a special Engineering Structure webinar:
Dos & Don’ts In Steel And Connection Design.
Starts 2pm ET
https://www.pdhsource.com/course/live-webinar-dos-donts-in-steel-and-connection-design/

We have put together our favourite #Engineering themed #podcasts for you. You're welcome 😉 #fridayfeeling https://www.borntoengineer.com/resources/top-engineering-podcasts-stem-podcast-list-top

ACCEPTANCE GUARANTEE


ncees

PDH Source engineering courses & live webinars meet NCEES Guidelines for Professional Engineer licenses renewal in all 50 states.

PDH Source will refund your money if the PDH credits you earn are rejected by your state board for any reason.

top
Copyright 2019 · All Rights Reserved PDH Source, LLC 513 E- Main Street # 981 Charlottesville, VA 22902 USA