• LOGIN
  • No products in the cart.

[Live Webinar] Dos & Don’ts In Steel and Connection Design

Intended Audience: Civil & Structure Engineers
Credits: 2 PDH Units
When: Tuesday 12/21. 2 – 4 pm ET

40 STUDENTS ENROLLED

Structural Steel buildings are designed by almost every design firm in North America and in many other countries. For each design, there could be several options that are most probably correct, however they are not all economical. Many project, particularly big project, may require value engineering and significant cost can be saved in the steel frame. Additionally, engineers typically delegate connection design to fabricators, which may also cause conflicts and issues in the field since fabricators and detailers are not fully aware of the project.

The webinar presents good practices in steel framing and in connection design to avoid conflicts and expensive modifications in the field which will result in economical design.

Date:  Tuesday.  December 21.  Starts: 2 – 4 pm ET
Credits: 2 PDH Units

Learning Objectives:

At the successful conclusion of this webinar, you will learn the following knowledge and skills:

  • Learn framing layouts that results in economic design
  • Learn how to specify structural steel that results in economical design
  • Learn about efficient and economical connections
  • Learn how to and what to delegate in connection design
  • Learn how to avoid conflicts during construction

Special Webinar Instructions

After payment, please visit this webinar page, click “Start Course” and fill out the Webinar Registration Form.  You’ll receive email notification and details on how to join the webinar.  You will then be able to access the webinar slides, test your system and receive webinar reminders.  After completing the webinar requirements, your certificate of completion will be saved and available for download in your profile.

We value your feedback! Please rate this webinar after completion.

Group Discounts Available

Course Reviews

4

4
4 ratings
  • 5 stars2
  • 4 stars1
  • 3 stars0
  • 2 stars1
  • 1 stars0
  1. Dos & Don'ts In Steel and Connection Design

    4

    Good subject matter, as most of us are NOT competent to perform connection design.
    I prefer courses that offer technical examples (sample worked-out problems). I find the ability to work through even extremely oversimplified example problems significantly increases my retention.

  2. dos & donts of steel connection design

    2

    fairly good

  3. Common Sense Design Advice

    5

    This is an excellent course summarizing the basics of economical steel design. I’ve been using these principles for most of my career, but it is good to see them presented in a concise and comprehensive manner like this. Nice job!

  4. 5

    Had difficulty in the quality of the verbal transmission, some dialogue was garbled.

TAKE THIS COURSE
  • $109.00
  • Average Rating4
  • Webinar No: WBNR 1150
  • PDH Units: 2

Once completed, your order and certificate of completion will be available in your profile when you’re logged in to the site.

Copyright 2019 · All Rights Reserved PDH Source, LLC 513 E- Main Street # 981 Charlottesville, VA 22902 USA