Setup Menus in Admin Panel

  • No products in the cart.

Profile Photo
  • Course No E – 1909
  • PDH Units: 3

Course No E - 1909
PDH Units: 3
$75.00

Profile Photo
  • Course No E – 1909
  • PDH Units: 3

Course No E - 1909
PDH Units: 3
$75.00

Intended Audience: Mechanical & HVAC Engineers
Credits: 3 PDH Units

The finite element method (FEM), is a numerical method for solving problems of engineering and mathematical physics. Typical problem areas of interest include structural analysisheat transferfluid flow, mass transport, and electromagnetic potential. Among them heat transfer problems are discussed here. The analytical solution of these problems generally require the solution to boundary value problems for partial differential equations. The finite element method formulation of the problem results in a system of algebraic equations. The method yields approximate values of the unknowns at discrete number of points over the domain. To solve the problem, it subdivides a large problem into smaller, simpler parts that are called finite elements. The simple equations that model these finite elements are then assembled into a larger system of equations that models the entire problem. FEM then uses variational methods from the calculus of variations to approximate a solution by minimizing an associated error function.

Learning Objectives

At the successful conclusion of this course, you’ll be able to identify and discuss:
  • To develop the finite element formulation for a model one-dimensional heat transfer problem
  • To discuss the possible refinements of the simplest approximation.
  • To develop the two-dimensional finite element formulation for a model 2-D problem like 2-D steady-state heat conduction problem

Join us this Thursday afternoon for a special Engineering Structure webinar:
Dos & Don’ts In Steel And Connection Design.
Starts 2pm ET
https://www.pdhsource.com/course/live-webinar-dos-donts-in-steel-and-connection-design/

We have put together our favourite #Engineering themed #podcasts for you. You're welcome 😉 #fridayfeeling https://www.borntoengineer.com/resources/top-engineering-podcasts-stem-podcast-list-top

ACCEPTANCE GUARANTEE


ncees

PDH Source engineering courses & live webinars meet NCEES Guidelines for Professional Engineer licenses renewal in all 50 states.

PDH Source will refund your money if the PDH credits you earn are rejected by your state board for any reason.

top
Copyright 2019 · All Rights Reserved PDH Source, LLC 513 E- Main Street # 981 Charlottesville, VA 22902 USA