Setup Menus in Admin Panel

  • No products in the cart.

Profile Photo
  • Course No E – 1733
  • PDH Units: 1

Course No E - 1733
PDH Units: 1
$25.00

Profile Photo
  • Course No E – 1733
  • PDH Units: 1

Course No E - 1733
PDH Units: 1
$25.00

Intended Audience: All Engineers & Contractors.
PDH UNITS: 1

Surveillance systems can be configured in numerous ways, depending upon the desired function of the system. Will the system simply observe an area and display activity in real time on a monitor with no memory, or will it be desirable to have the system remember what activity took place in the field of view of a camera over a period of time? If so, how long should the system remember what happened before the information is erased or replaced with new information? Will the system consist of a single camera or will it have multiple units with their outputs displayed simultaneously at a monitoring station? What communication method will be used among system components? Will data be compressed? If so, how? Will the system be wireless or wired? Will the cameras be fixed or moving? Will they be indoors, outdoors or both? Will they operate during daytime hours, nighttime hours or both? Will an operator be able to adjust the camera field of view from a remote location? Fortunately, surveillance system manufacturers have produced design guides, one of which is the Samsung Networked Surveillance System Design Guide, the first edition of which was produced in 2012. This guide can be downloaded from the internet. References:

  1. Course Notes prepared by instructor
  2. NFPA 70 National Electrical Code, 2017 Ed., National Fire Protection Association, Quincy, MA, 2016.
  3. NFPA 110 Standard for Emergency and Standby Power Systems, 2016 Ed, National Fire Protection Association, Quincy, MA, 2015.

Learning Objectives:

Upon completion of the course, the student should understand:
  • The layout and operation options of surveillance systems.
  • The types and classifications of emergency and standby power systems.
  • The characteristics of a “smart home.”

Join us this Thursday afternoon for a special Engineering Structure webinar:
Dos & Don’ts In Steel And Connection Design.
Starts 2pm ET
https://www.pdhsource.com/course/live-webinar-dos-donts-in-steel-and-connection-design/

We have put together our favourite #Engineering themed #podcasts for you. You're welcome 😉 #fridayfeeling https://www.borntoengineer.com/resources/top-engineering-podcasts-stem-podcast-list-top

ACCEPTANCE GUARANTEE


ncees

PDH Source engineering courses & live webinars meet NCEES Guidelines for Professional Engineer licenses renewal in all 50 states.

PDH Source will refund your money if the PDH credits you earn are rejected by your state board for any reason.

top
Copyright 2019 · All Rights Reserved PDH Source, LLC 513 E- Main Street # 981 Charlottesville, VA 22902 USA