Setup Menus in Admin Panel

  • No products in the cart.

Profile Photo
  • Course No E – 1421
  • PDH Units 5.00

Course No E - 1421
PDH Units 5.00
$125.00

Profile Photo
  • Course No E – 1421
  • PDH Units 5.00

Course No E - 1421
PDH Units 5.00
$125.00

Intended Audience: civil engineers and other design and construction professionals

PDH UNITS: 5

This course will tell you about hot-mix asphalt often used for high-performance pavements. The degree of performance required should be selected based on traffic conditions and the availability of satisfactory materials. Hot-mix asphalt mixtures consist of mineral aggregate and asphalt cement. These hot-mix asphalt mixtures are particularly suitable for airfield pavements, roads and streets, and storage areas. Course Outline 1. GENERAL 2. EQUIPMENT 3. MATERIALS 4. DENSE-GRADED HOT-MIX ASPHALT 5. POROUS FRICTION COURSE 6. STONE MATRIX ASPHALT This course will give civil engineers and others an introduction to the hydrological and hydraulic design of area drainage plans, including hydraulic structures, erosion control and riprap design.

Learning Objectives

At the successful conclusion of this course, you’ll be able to identify and discuss:
  • Learn about the advantages and disadvantages of hot mix asphalt concrete for pavements;
  • Learn about batch plant equipment;
  • Learn how to calibrate cold feed bins;
  • Learn the correct aggregate gradations for hot-mix asphalt concrete pavements;
  • Learn about the drum mixer and how it is employed;
  • Learn about placement equipment;
  • Learn how joint heaters are used;
  • Learn about static steel-wheeler rollers;
  • Learn the specifications for asphalt materials;
  • Learn the special requirements for hot mix asphalt pavements in cold regions; and
  • Learn how the Penetration Viscosity Number (PVN) is determined and used in hot mix pavement design.

Join us this Thursday afternoon for a special Engineering Structure webinar:
Dos & Don’ts In Steel And Connection Design.
Starts 2pm ET
https://www.pdhsource.com/course/live-webinar-dos-donts-in-steel-and-connection-design/

We have put together our favourite #Engineering themed #podcasts for you. You're welcome 😉 #fridayfeeling https://www.borntoengineer.com/resources/top-engineering-podcasts-stem-podcast-list-top

ACCEPTANCE GUARANTEE


ncees

PDH Source engineering courses & live webinars meet NCEES Guidelines for Professional Engineer licenses renewal in all 50 states.

PDH Source will refund your money if the PDH credits you earn are rejected by your state board for any reason.

top
Copyright 2019 · All Rights Reserved PDH Source, LLC 513 E- Main Street # 981 Charlottesville, VA 22902 USA